The LCR-Reader's Probe Connector is a shielded two-wire connector that turns LCR-Reader and Smart Tweezers LCR- and ESR-meters into a probe station. The connector adds functionality by allowing LCR-Reader to measure outside of the tweezers' maximum distance between the tips.
Each Probe Connector kit comes with 7 different attachment-probes: 1 longer pin-probe, 1 medium pin-probe, 2 alligator clips, 1 spade connector and 2 multimeter 4mm jacks. Each tip is screwed into the end of the connector cable.
LCR-Reader Probe Connector is easy to install on LCR-Reader or Smart Tweezers; simply unscrew one of the gold-plated tweezer-probes from the device and replace with the flat end of the connector. The connector end has two gold-strips that match with those on the LCR-Reader's flex cable. Fasten together using the screws from the tweezer tip and begin measuring.
Features | |
---|---|
Includes: | |
1 long pin-probe | |
1 medium pin-probe | |
1 spade connector | |
2 alligator clips | |
2 4mm multimeter jacks | |
Cable Length: | 60 cm |
Designed and Manufactured In Canada. Patented in Canada, USA, Europe, Japan, China, Taiwan, Hong Kong, and India.
© Siborg Systems Inc. All rights reserved.